How to achieve continuous operation of carbonization equipment

In order to eliminate the low output of traditional carbonized materials, manufacturers of carbonized products urgently need a carbonization equipment that can be produced in large quantities. Henan Hongrui Company has developed a continuous carbonization machine according to market needs. For you to introduce in detail how the carbonization equipment can achieve continuous work: it is a continuous sawdust carbonization machine that integrates drying and carbonization. It uses the production raw materials to directly feed and discharge continuously, and does not need coal, electricity, etc. to provide heat source. The recycling and utilization of combustible flue gas generated in the carbonization stage can continue to carbonize, so that the temperature of the bottom of the carbonization machine can reach up to 900 ° C, and the carbonization speed is fast. It is a new type of environmentally friendly smokeless carbon powder carbonization machine. Because the combustible gas such as carbon monoxide generated by carbonization enters the flue and is circulated and burned through purification filtration, the problem that the conventional carbonization equipment does not meet the standard is completely solved. Burning and making full use of waste heat to achieve temperature increase in the drying, preheating and carbonization stages of raw materials, solving the problems of high energy consumption, high pollution and high cost in the production process of traditional carbon powder carbonization machine, and completely achieving the environmental protection goal of energy saving and emission reduction.

Sawdust production mechanism charcoal needs attention to those

Sawdust is the best raw material for the production of mechanical carbon, so the sawdust production mechanism charcoal need to pay attention to those? What are the special requirements for the humidity of the sawdust when the charcoal making machineis made? The charcoal making machine equipment uses sawdust as raw material, and the moisture requirement of raw materials must be controlled within 12%. The charcoal making machine equipment bar machine has higher requirements on the moisture content of the raw materials in the production process, and the moisture content of the raw materials is generally 6%-12%. between. If the moisture content is <6%, the conversion of raw materials and viscosity are poor, the rods are not strong; if the water content is >12%, the rods are soft and easy to bend and cracks easily, and the density is small.
The wood chips enter the drum of the charcoal making machine from the feeding port, and the blowing pipe cooperates with the rotating cylinder body to boil and fluidize in the cylinder. The hot air is in full contact with the material to carry out the drying operation. The airflow type charcoal making machine refers to the powder. The wet sawdust is continuously added to the drying pipe by a screw conveyor. In the transportation and dispersion of the high-speed hot gas flow, the charcoal making machine evaporates the water in the wet material to obtain a powdery or granular dry product, and completes the drying.
The moisture content of the raw material is roughly identified by observation and difficulty. First of all, we touch the working separator shell by hand, the temperature makes the hand feel hot; secondly, the color of the material just coming out requires yellowing; finally, grab the material just after the hand, and use the palm of your hand to make it into a group. Then, let go and let go, and ask for all the raw materials to be scattered. From the actual production experience, it is considered from this point of view whether the moisture content of the raw materials is recognized.

What processes and equipment are needed for the production of activated carbon from coconut shells?

There are several types of equipment for coconut shell activated carbon production line. According to the carbonization method, there are coconut shell carbon powder production line, coconut shell charcoal production line, and coconut shell does not become carbon production line.

     The first type: the coconut shell carbon powder production line requires a pulverizer, a dryer, and a continuous carbon powder carbonization machine. The carbon produced is carbon powder and is granular. Can be further processed into activated carbon.

  The second type: the coconut shell is directly charred, what it looks like, the charcoalized coconut shell charcoal looks like it, the shape is similar, but the coconut shell is in, and the coconut shell charcoal comes out, which is blocky.