Sawdust production mechanism charcoal needs attention to those

Sawdust is the best raw material for the production of mechanical carbon, so the sawdust production mechanism charcoal need to pay attention to those? What are the special requirements for the humidity of the sawdust when the charcoal making machineis made? The charcoal making machine equipment uses sawdust as raw material, and the moisture requirement of raw materials must be controlled within 12%. The charcoal making machine equipment bar machine has higher requirements on the moisture content of the raw materials in the production process, and the moisture content of the raw materials is generally 6%-12%. between. If the moisture content is <6%, the conversion of raw materials and viscosity are poor, the rods are not strong; if the water content is >12%, the rods are soft and easy to bend and cracks easily, and the density is small.
The wood chips enter the drum of the charcoal making machine from the feeding port, and the blowing pipe cooperates with the rotating cylinder body to boil and fluidize in the cylinder. The hot air is in full contact with the material to carry out the drying operation. The airflow type charcoal making machine refers to the powder. The wet sawdust is continuously added to the drying pipe by a screw conveyor. In the transportation and dispersion of the high-speed hot gas flow, the charcoal making machine evaporates the water in the wet material to obtain a powdery or granular dry product, and completes the drying.
The moisture content of the raw material is roughly identified by observation and difficulty. First of all, we touch the working separator shell by hand, the temperature makes the hand feel hot; secondly, the color of the material just coming out requires yellowing; finally, grab the material just after the hand, and use the palm of your hand to make it into a group. Then, let go and let go, and ask for all the raw materials to be scattered. From the actual production experience, it is considered from this point of view whether the moisture content of the raw materials is recognized.